Johansson Sliding Ram Radial Arm toolroom Drill Press

Used JOHANSSON # 30 " SLIDING RAM-TYPE RADIAL DRILL 
  
 EQUIPPED WITH: 
 Tapping Attachment - Manual Table Adjustment 
 Power Arm Elevation w/Power Locks 
 Power Down Feed - Jacobs Chuck 

Arm Length............................. 2'6"
 Column Diameter........................ 6"
 Vertical Arm Travel on Column.......... 12"
 Vertical Table Travel on Column........ 14.5"
 Vertical Spindle Travel in Head........ 6"
 Horizontal Head Travel on Ram.......... 24"
 Drill Capacity, Cast Iron.............. 1.75"
 Drill Capacity, Mild Steel............. 1.5"
 Spindle-Radius, Minimum................ 11"
 Spindle-Radius, Maximum................ 35"
 Spindle-Nose to Table, Minimum......... 4"
 Spindle-Nose to Table, Maximum......... 31"
 Spindle-Nose to Base, Minimum.......... 35"
 Spindle-Nose to Base, Maximum.......... 53"
 Spindle-Center to Column, Minimum...... 2.5"
 Spindle-Center to Column, Maximum...... 30"
 Table Working Surface, W x L........... 17" x 37"
 Table Dimensions Overall, W x L........ 20" x 40"
 Base Working Surface, W x L............ 20.5" x 24"
 Quill Diameter......................... 2.75"
 (8) Spindle Speeds, Range.............. 120 to 1800 RPM
 (8) Spindle Feeds, Range............... .006 to .048 IPR
 2-Speed Main Motor, Horsepower......... 3/1.5 HP
 Weight Approximately................... 2400 LBS