Rice Machinery

Proudly Made in USA

1104 Pontiac Avenue Cranston, RI 02920

Reconditioned Model #TRM Proto-TRAK, 2-Axis MX-2 Bed Mill

Reconditioned Model #TRM Proto-TRAK, 2-Axis MX-2 Bed Mill Complete with precision hardened & ground 2-Axis Ballscrews and Servo Drive Motors, hardened & ground box way construction, turcite coating on wear surfaces, one shot lube system, 3HP Vari-Speed Drive and the following:

Specifications

Machine Specifications:
Table size  | 50” x 10”
T-slots  | 5/8”W x 3”L x 2-9/16” pitch
Travel X,Y  | 32” x 16”
Quill diameter  | 3-15/16”
Spindle taper  | #R8
Spindle speed range  | 60-4200rpm
Ram travel  | 24”
Maximum quill travel  | 5”
Head swivel right and left  | 90 degrees
Quill feed per rev.  | 0.002, 0.004
In auto feed  | 0.006”/rev
Spindle Motor  | 3 HP
Power requirement  | 50 Hz/60; 3 ph; 220/440V; 8.6/4.3 amps
Maximum weight on table  | 850 lbs
Machine net weight  | 2,850 lb, shipping 3,360 lb
Footprint  | Dovetail X-axis
Way Surface  | Square ways Y & Z axis

Control Specifications:
9” CRT  | Machine Tool error & Backlash compensation
RS232 port  | Error Messages
Dual Floppy Disk Drive  | Fault Messages
Tool Compensation  | Program Downloading
Circular Interpolation  | Software Programmable
Linear Interpolation  | Canned Cycles
Conrad  | Part graphics (real run time)
Teach  | Math help
Scaling  | Mirror Image & Rotation
2-Axis Circular & Linear Interpolation  | Tool Length Offset
Helical Interpolation  | 2D Graphics w/Selectable Views

Additional Information

Accessories:
Assorted #40 tooling  |  
Kurt Power Draw bar system

Price: $12,500.00

Condition: Excellent

Location: Cranston, RI

Used Equipment